LTE News

    Easybox 904 LTE Firmware how to install

    bundyboy

    New Member
    Tarif
    LTE
    Hardware
    easybox 904 lte
    Hello,

    I hope you can help me regarding Easybox 904 LTE, can someone tell me
    step by step how to flash firmware ?

    i have this error:



    and when I try to restart it, i receive this msg:



    I have downloaded this files:

    UEfullimage_AT904L-03.07
    UEfullimage_AT904L-01.05
    UEfullimage_AT904L-03.18
    UEfullimage_AT904L-03.05
    and
    tftpd64-4.62-setup

    Thank you
     

    Moderator

    Administrator
    Teammitglied
    Anbieter
    Vodafone
    Tarif
    Gigacube
    LTE Speed
    500 MBit/s
    Hardware
    Gigacube 5G
    That means: Restart the box an hold the reset button at least for 10 seconds. Than the recovery should start...
    But the 904 is over 12 years old maybe a look for a newer one?
    Regards
     

    bundyboy

    New Member
    Tarif
    LTE
    Hardware
    easybox 904 lte
    That means: Restart the box an hold the reset button at least for 10 seconds. Than the recovery should start...
    But the 904 is over 12 years old maybe a look for a newer one?
    Regards
    Hi,

    yes i know that is so old :D

    but i would love to repair it.

    can you tell me the steps what i need to do to flash firmware ?

    when the router is in recovery mode, what steps i need to do on computer - windows 10 ?

    thanks
     

    Moderator

    Administrator
    Teammitglied
    Anbieter
    Vodafone
    Tarif
    Gigacube
    LTE Speed
    500 MBit/s
    Hardware
    Gigacube 5G
    Unfortunately I do not have the 904, so I can not help directly.
    But maybe translate the page here, that seems to be the description.

     

    bundyboy

    New Member
    Tarif
    LTE
    Hardware
    easybox 904 lte
    Unfortunately I do not have the 904, so I can not help directly.
    But maybe translate the page here, that seems to be the description.

    Hi,

    I have done this now, but every time i receive an error: wrong image

    so i have done this:



    and with program:



    i start transfer process of the image, but when the process is finished

    on the screen of router i receive msg: wrong image

    why ?

    i tried several different images

    thank you
     

    bundyboy

    New Member
    Tarif
    LTE
    Hardware
    easybox 904 lte
    Nažalost, nemam 904, pa ne mogu izravno pomoći.
    Ali možda prevedite stranicu ovdje, čini se da je to opis.

    bok

    Uspio sam instalirati firmware, sada ruter radi




    Verzija 1.07 s telnetom na portu 2300

    ali sada kada umetnem SIM karticu i kliknem Reconnect

    kaže: Molimo umetnite SIM karticu ili odspojite i provjerite SIM karticu.



    je li ovo normalno?

    Dakle, samo trebam promijeniti APN postavke?

    Hvala vam
     
    Oben